NCP1256ESN65T1G

The NCP1256 includes everything to build cost-effective switch mode power supplies ranging from a few watts up to several tens of watts. Housed in a tiny TSOP-6 package, the part can be supplied up to 30 V. It hosts a jittered 65 or 100-kHz switching circuitry operated in peak current mode control. When the power in the secondary side starts to decrease, the controller automatically folds back its switching frequency down to a minimum level of 26 kHz. As the power further goes down, the part enters skip cycle while limiting the peak current. NCP1256 comes with several protection features such as a timer-based auto-recovery short circuit protection, lossless OPP, and an easily adjustable Brown Out (BO) pin. Two inputs are provided to latch off the part in a practical way, for instance with OVP and OTP events. Several options exists to chose latch or auto-recovery.

主な特長

• Frequency Foldback down to 26 kHz and Skip−cycle in Light Load Conditions
• 70−ms Timer−based Auto−recovery Short−circuit Protection
• Frequency Jittering in Normal and Frequency Foldback Modes
• +500 mA/ −500 mA Source/Sink Drive Capability
• Fixed−frequency 65−kHz or 100−kHz Current−mode Control Operation
• Pb−Free Device
• Adjustable Over Power Protection (OPP) Circuit, Disabled at Low Line
• Adjustable Brown Out Level
• Internally−fixed Slope Compensation Ramp
• Internally−fixed 4−ms Soft−start
• Double Hiccup Auto−recovery Short−circuit Protection
• Pre−short Ready for Latched OCP Option
• Latched OVP Protection on Vcc
• Latched Inputs for Improved Robustness (OVP and OTP implementations)
• EPS 2.0 Compliant

応用

• Ac−dc Adapters for Portable Devices
• Ac−dc Adapters for Computers
• Ac−dc Adapters for Tablets
• General Ac−dc Adapters